ema5 / uma5n / fma5a t r ansistors rev . a 1/2 emitter common (dual digit a l transistors) ema5 / uma5n / fma5a z f eatu r es 1) t w o dt a123js in a emt or umt or smt p a ckage. z equiv a le nt c i rc uit ema5 / uma5n fma5a r 1 r 2 r 2 r 1 (1) (3) (4) (5) (2) dtr 2 r 1 r 2 r 2 r 1 dtr 1 (4) (3) (2) (1) (5) z packag in g , markin g , an d p ackag in g sp ecificatio n s type package marking code basic ordering unit (pieces) uma5n umt5 a5 tr 3000 ema5 emt5 a5 t2r 8000 fma5a smt5 a5 t148 3000 z a b solute maximum ratings (t a= 25 c) parameter supply voltag input voltage output current storage temperature ? do not exceed 120m per element for the uma5n. do not exceed 200mw per element for the fma5a. symbol v cc v in i o tstg limits ? 50 5 ? 100 300 (total) ? 55 to +150 unit v ? 12 v ma ? power dissipation 150 (total) mw ?c junction temperature tj 150 ?c pd ema5 / uma5n fma5a z ex te rna l dime ns ions (unit : mm) rohm : emt5 rohm : umt5 rohm : smt5 eiaj : sc-74a fma5a uma5n ema5 eiaj : sc-88a each lead has same dimensions each lead has same dimensions 0.9 0.15 0to0.1 0.1min. 0.7 2.1 1.3 0.65 2.0 ( 4 ) ( 1 ) (5) 0.2 1.25 ( 2 ) 0.65 ( 3 ) each lead has same dimensions 0to0.1 0.8 0.3to0.6 0.15 1.6 2.8 0.95 1.9 ( 4 ) ( 5 ) ( 1 ) 0.3 ( 3 ) 0.95 ( 2 ) 2.9 0.22 1.2 1.6 ( 1 ) ( 2 ) ( 3 ) ( 5 ) ( 4 ) 0.13 0.5 0.5 0.5 1.0 1.6 z electrical ch aracteristics (t a= 25 c) parameter symbol min. typ. max. unit conditions input voltage output voltage input current output current dc current gain input resistance resistance ratio v i (off) v i (on) v o (on) i i i o (off) g i r 1 r 2 / r 1 ? ? 1.1 ? ? ? 80 1.54 17 ? ? ? 0.1 ? ? ? 2.2 ? ? 21 ? 0.5 ? ? 0.3 ? 3.6 ? 0.5 ? 2.86 26 v v ma a ? k ? transition frequency f t ? 250 ? mhz ? ? v cc = ? 5v, i o = ? 100 a v o = ? 0.3v, i o = ? 5ma i o /i i = ? 5ma/ ? 0.25ma v i = ? 5v v cc = ? 50v, v i =0v v ce = ? 10v, i e =5ma, f=100mhz v o = ? 5v, i o = ? 10ma ? transition frequency of the device.
ema5 / uma5n / fma5a t r ansistors rev . a 2/2 z electrical ch aracteristics cu rv es v o =? 0.3v input voltage : v i(on) (v) output current : i o (a) ? 100 ? 50 ? 20 ? 10 ? 5 ? 2 ? 1 ? 500m ? 200m ? 100m 25 c 100 c ta =? 40 c ? 100 ? 1m ? 10m ? 100m ? 200 ? 2m ? 20m ? 500 ? 5m ? 50m fig.1 input voltage vs. output current (on characteristics) 0 ? 3.0 ? 10m ? 1 ? 2m ? 5m ? 1m ? 200 ? 500 ? 100 ? 20 ? 50 ? 10 ? 2 ? 5 ? 0.5 ? 1.0 ? 1.5 ? 2.0 ? 2.5 input voltage : v i(off) (v) output current : io (a) v cc =? 5v ta = 100 c 25 c ? 40 c fig.2 output current vs. input voltage (off characteristics) dc current gain : g i output current : i o (a) 1k 500 200 100 50 20 10 5 2 1 ? 100 ? 1m ? 10m ? 100m ? 200 ? 2m ? 20m ? 500 ? 5m ? 50m v o =? 5v fig.3 dc current gain vs. output current 25 c ? 40 c ta = 100 c l o /l i = 20 ? 1 ? 500m ? 200m ? 100m ? 10m ? 50m ? 5m ? 20m ? 2m ? 1m output current : i o (a) output voltage : v o(on) (v) fig.4 output voltage vs. output current ta = 100 c 25 c ? 40 c ? 100 ? 1m ? 10m ? 100m ? 200 ? 2m ? 20m ? 500 ? 5m ? 50m
appendix appendix1-rev1.1 the products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. notes no technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of rohm co.,ltd. the contents described herein are subject to change without notice. the specifications for the product described in this document are for reference only. upon actual use, therefore, please request that specifications to be separately delivered. application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. rohm co.,ltd. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by rohm co., ltd. is granted to any such buyer. products listed in this document are no antiradiation design. about export control order in japan products described herein are the objects of controlled goods in annex 1 (item 16) of export trade control order in japan. in case of export from japan, please confirm if it applies to "objective" criteria or an "informed" (by miti clause) on the basis of "catch all controls for non-proliferation of weapons of mass destruction.
|
